home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: istar.net!infoshare!whome!gts!nypl!torfree!bc074
- From: bc074@torfree.net (Charles Connolly)
- Subject: Re: C=1960 vs C=1942 for
- Message-ID: <Dn4KI9.B4F.0.queen@torfree.net>
- Organization: Toronto Free-Net
- X-Newsreader: TIN [version 1.2 PL2]
- References: <3-633-265-0-3122bfbd@nwamiga.apana.org.au>
- Date: Wed, 21 Feb 1996 12:10:57 GMT
-
- From bc074@freenet.toronto.on.ca Wed Feb 21 06:40:14 1996
- Date: Wed, 21 Feb 1996 06:35:51 -0500 (EST)
- From: Charles Connolly <bc074@freenet.toronto.on.ca>
- To: Charles Connolly <bc074@freenet.toronto.on.ca>
- Subject: AMIGA (fwd)
-
-
- Reply-To: Charles.Connolly@hof.to.org
-
-
- I don't have an AMIGA, I have never been able to afford one but I have
- allways felt that if Money were no problem that would be the computer
- I would like to have. I do however have an AMIGA monitor and a sister-
- in-law with a A500.
-
- Now For My Question.
-
-
- I have a C< Commodore 1084S - Which I use with my XT as a CGA monitor and
- with my Radio Shack Coco 3 as a Composite Monitor. A frend is trying to
- help me make an adaptor so that I can use the lin. RGB input on my monitor.
-
- The Monitor was a Demo Model at the store so there is some possibility
- that the wrong cable has been included The AMIGA cable only seems to
- take 5 connections to the lin. RGB input on the back of the monitor.
-
- The Monitor is Model No. 1084S-P
-
- I am including the following message to indicate what type of info
- Merv needs.
-
-
- Your help would be greatly appreciated.
-
-
- -Charles.
-
- FORWARDED MESSAGE FOLLOWS:
-
- Message # 21326 *General Local*
- To : Charles Connolly
- >From : Merv Curley
- Subject : Re: Wonder computers
- Date : 96/02/17 22:32:34
- Previous Reply is Message 21325
-
- On Saturday, February 17th, 1996 - Charles Connolly wrote:
-
- CC> You want the Pinout of the 1084s RGBa input and the specifications
- CC> for the input signals Right ?
-
- Yep. The polarity of the sync would be helpful, but I suspect it
- will be negative. Some Delphi people gave me a pin out for the 1084-S,
- but that was for separate H and V Sync pulses. Your cable only appears
- to have 5 pins used of the 6, so that must mean 3 colors, ground and
- sync.
-
- I'll keep trying for more info too.
-
- -----------------------------------------------------------------------
- -- The House of Fire BBS -- Toronto, Ont -- (416) 601-0085 (v.32bis) --
- -----------------------------------------------------------------------
-
- [Exported by the Internet Connection 3.1/Unregistered 02-20-96 21:09:29]
- --
- |Fidonet: Charles Connolly 1:250/536
- |Internet: Charles.Connolly@hof.to.org
- |
- | Standard disclaimer: The views of this user are strictly his own.
-
-
-